Austenitic Stainless Steel Pipe/Tube
Martensitc&Ferritic Stainless Steel Pipe/Tube
Duplex &Super Duplex Pipes/Tube
Pure Nickel&Nickel Alloy Pipe/Tube
Titanium&Titanium Alloy Pipe/Tube
Finned &Corrugated Pipe/Tube
Butt-Weld Pipe Fittings
Forged Flanges &Fittings
Duplex and Super Duplex Pipes and Tubes

Duplex Stainless Steel  have a structure that contains both ferrite and austenite. Duplex alloys have higher strength and better stress corrosion cracking resistance than most austenitic alloys and greater toughness than ferritic alloys, especially at low temperatures. The corrosion resistance of duplex alloys depends primarily on their composition, especially the amount of chromium, molybdenum, and nitrogen they contain.

Standard: ASTM/ASME A/SA789, A/SA790, A/SA928, DIN17456/17458, EN10216-5. After negotiation, we can supply pipe with customers'requirement. 

Material Grade:UNS S31803,S32205,S32101,S32304,S32750,S32760,1.4462,1.4410etc.   

Advantage Material Grade:

UNS S31803/1.4462 Tube

UNS S32205/1.4462 Tube

UNS S32750/1.4410 Tube

U Bend Duplex Tube

Size Range:

Stainless Steel Seamless Tube

ASTM A789/A789M: OD: Φ12.7mm-Φ203mm; WT:0.5mm-6.35mm

Stainless Steel Seamless Pipe

ASTM A790/A790M: OD: Φ6mm-Φ325mm; WT:0.5mm-30mm

Stainless Steel Welded Tube

ASTM A789/A789M: OD: Φ12.7mm-Φ203mm; WT:0.5mm-4.0mm

Stainless Steel Welded Pipe

ASTM A790/A790M: OD: Φ10mm-Φ2000mm; WT:0.5mm-40mm

(OD≤630mm for single seam; OD>Φ630mm For circumferential seam)

ASTM A928/A928M: OD: Φ10mm-Φ406mm; WT:0.5mm-10mm

About Us Products Service Contact Us

Main Products :Pipes    Tubes  253MA Tubes  Duplex Tubes  Corrugated / Finned Tubes Butt Weld Fittings  

 Threaded Fittings    Flanges   Valves 

All Rights Reserved Copyright 2000-2020   沪ICP备15010741号-1


沪公网安备 31011202003643号